Files
d2r-mobile/dm/host/thread.c
T
2026-10-12 16:51:08 +08:00

37 lines
3.6 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
// 客体线程环境:门槽 = 宿主门入口;x18 槽清零;tpidr_el0 槽 = ELF TLS 块;tpidrro_el0 槽 = Horizon ThreadLocalRegion(0x200)。
// SDK 的内部临界区从 TLR[0x1f8] 取当前线程对象指针,这里给每线程分配一个零初始化对象并写入。
// Guest thread environment: gate slot = host gate entry; x18 slot cleared; tpidr_el0 slot = ELF TLS block; tpidrro_el0 slot = Horizon ThreadLocalRegion (0x200).
// The SDK's internal critical section takes the current thread object pointer from TLR[0x1f8]; here each thread gets a zero-initialized object allocated and written in.
#include "dm.h"
#define TLS_SIZE 8192
#define TLR_SIZE 0x200
#define THREAD_OBJ_SIZE 0x400
extern void dm_gate(void); // entry.S:门公共入口 | entry.S: common gate entry
#include "front.h"
#include "dm_uiscreen.h"
void guest_thread_init(void) {
pthread_setspecific(g_keygate, (void *)dm_gate);
for (int i = 0; i < 2; i++) if (g_keyres[i]) pthread_setspecific(g_keyres[i], (void *)dm_game_res(i)); // 分辨率参数位:{u32 宽, u32 高} 打包 | resolution parameter slot: {u32 width, u32 height} packed
if (g_keyaspect || g_keyaspectui) { // 宽高比上限参数位:max(19/9, 两种模式输出宽 / 高),float 位模式放低 32 位 | aspect ratio limit parameter slot: max(19/9, output width / height of the two modes), float bit pattern in the low 32 bits
float a = 19.0f / 9.0f; int wide = 0;
for (int i = 0; i < 2; i++) { uint64_t r = front_game_res(i); float w = (float)(uint32_t)r, h = (float)(uint32_t)(r >> 32); if (h > 0 && w / h > a) { a = w / h; wide = 1; } }
// 界面边柱着色器的上限:屏幕宽于 19:9 时另加 0.15,把边柱向内的柔边推出屏幕;16:9 不变。
// 推导:边柱内缘 x = 屏高 × 上限 / 2,上限每加 Δ,内缘每侧外移 屏高 × Δ / 2。Mac 1952x900 实测柔边宽度 ≤ 30 像素
// (上限 = 屏幕比例时右缘第 0–20 列由黑渐亮,上限推到 2.4 即消失)⇒ 需 Δ ≥ 2 × 30 / 900 ≈ 0.067;取 0.15(每侧外移约 67 像素)留出一倍以上余量。
// 不是魔数:屏高变大时余量按比例不变(Δ 是相对屏高的量)
// Limit of the UI side-pillar shader: when the screen is wider than 19:9 add another 0.15, pushing the pillars' inward soft edge off the screen; 16:9 is unchanged.
// Derivation: pillar inner edge x = screen height * limit / 2, so for every delta added to the limit the inner edge moves outward by screen height * delta / 2 on each side. Measured on Mac 1952x900, the soft edge is <= 30 pixels wide
// (with limit = screen aspect ratio, columns 0–20 at the right edge fade from black to bright, and it disappears once the limit is pushed to 2.4) => need delta >= 2 * 30 / 900 ~ 0.067; 0.15 is taken (about 67 pixels outward per side), leaving more than double the margin.
// Not a magic number: when the screen height grows the margin stays proportional (delta is relative to screen height)
float ui = wide ? a + 0.15f : a;
uint32_t bits;
if (g_keyaspect) { memcpy(&bits, &a, 4); pthread_setspecific(g_keyaspect, (void *)(uintptr_t)bits); }
if (g_keyaspectui) { memcpy(&bits, &ui, 4); pthread_setspecific(g_keyaspectui, (void *)(uintptr_t)bits); }
}
pthread_setspecific(g_key18, 0);
pthread_setspecific(g_keytls, calloc(1, TLS_SIZE));
uint8_t *tlr = calloc(1, TLR_SIZE);
*(void **)(tlr + 0x1f8) = calloc(1, THREAD_OBJ_SIZE); // 当前线程对象 | current thread object
pthread_setspecific(g_keytlr, tlr);
}