shenlei 4f3fe1f94b
Offline project checks / check (push) Canceled after 0s
Fix candidate build metadata and runtime safeguards
Repair kernel patch formatting and refresh kernel/camera package revisions and checksums. Integrate battery guard into generated images, correct charging controls and emergency shutdown handling, and reject invalid camera authentication configuration.

Extend recipe validation and regression coverage, and update build and installation documentation. Kernel, camera and image compilation remain pending on the build server.
2026-11-09 10:49:22 +09:00

Platina Linux — Xiaomi Mi 8 Lite headless Linux server

Platina Linux for Xiaomi Mi 8 Lite

Turn a Xiaomi Mi 8 Lite (platina, M1808D2TG, Snapdragon 660 / SDM660) into an ARM64 headless Linux server with Wi-Fi, USB networking and key-only SSH. Built on postmarketOS and Alpine Linux, it boots directly from eMMC.

Source checks License: GPL v2 Device: Xiaomi Mi 8 Lite

Integration: 0.8.1 · Development / early hardware testing · Source-only release

The existing test phone runs 0.8.1 with a rear-camera MJPEG stream, optional browser microphone listening, compact controls and digital zoom up to 10×. Capture is OFF after startup. This is a tested existing-installation update, not a fully qualified new installation image or a complete smartphone OS.

Installation · Build · Camera, audio and Home Assistant · Display · Shutdown · Changelog · Releases

Camera and compact controls

The main web panel contains zoom, focus, JPEG quality, resolution and audio. Exposure, white balance, colors and orientation are in the Advanced / Pokročilé dialog. Desktop and mobile layouts were checked without page scrolling. The header shows actual FPS, resolution and a millisecond processing label (frame age since the sensor timestamp, including waiting/processing).

  • Digital zoom 1–10×: a centered crop in the shared image pipeline, so a web zoom change also appears in the Home Assistant image. Resolution stays fixed; digital zoom cannot add missing detail.
  • Six output sizes: 12, 5.4, 3, 1.3, 0.75 and 0.33 MP. At 1× zoom they retain the full sensor field of view. JPEG quality ranges from 10 to 95.
  • Exposure and white balance: automatic/manual modes, live sensor time/gain telemetry, manual focus and color controls. The capture target is fixed at 30 FPS; observed output rates depend on scene, resolution and processing load.
  • Browser audio: explicit microphone ON/OFF and volume control. Audio and MJPEG remain separate and are not precisely synchronized.
  • Home Assistant: MQTT Discovery controls and a shared MJPEG/snapshot output. The current HA MJPEG camera does not carry audio. A unified A/V stream is deferred; no always-on transcoder or external server is required by this release.

Open http://platina.local:8082/ on your own qualified installation. The service has no user login: keep it on a trusted network or behind an appropriate authenticated proxy/VPN. See the camera guide for source builds, credentials, startup policy and qualification limits.

Feature status

Last reviewed 2026-10-27, on the maintainer's Tianma Mi 8 Lite. 🟢 Verified · 🟠 Partial / awaiting qualification · 🔴 Unsupported / not working

Feature Status Evidence and limits
Linux boot from eMMC, ARM64 Alpine and OpenRC 🟢 Normal starts and repeated restarts
Key-only SSH over Wi-Fi and USB networking 🟢 Administrator login; password/root SSH login disabled
Wi-Fi reconnect, USB recovery and mDNS 🟢 Tested recovery paths and local hostname
eMMC / ext4 and battery operation 🟢 Installed system and physically disconnected data USB operation
Separate charger operation 🟢 Short physical charging/operation tests
Battery / CPU / GPU thermal telemetry 🟢 Readings available; state-of-charge accuracy and low-battery policy need work
Tianma NT36672A display 🟢 Boot logo, brightness and ten off/on cycles tested
Full display power removal 🟠 VSP/VSN remain fixed always-on; full rail shutdown/power savings unproven
Power + Volume Up shutdown 🟢 Hold both 3 seconds, release both; physical battery shutdown tested
Staying off with USB/charger attached 🔴 Disconnect external power before shutdown; charger boot starts Linux again
Rear camera, web controls and HA MJPEG 🟠 Live 2008×2680 MJPEG/zoom/UI checked; color, exposure response and long-term qualification remain limited
Browser microphone 🟠 PCM playback/lifecycle checked; subjective quality and synchronized A/V not qualified
H.264 / shared video and audio in HA 🔴 Deferred; Venus is not a working hardware encoder path
Continuous 48–72-hour operation / sustained power balance 🟠 Qualification pending; short tests are not a soak test
Off-site VPN access 🟠 Local jump route checked; real off-site client test pending
CPU frequency scaling 🟠 No supported full DVFS claim
Bluetooth and SD card 🟠 Not functionally qualified
Touchscreen on this device 🔴 Controller initialization fails
Mobile calls/data and Android apps 🔴 Outside this headless integration

Build and installation boundaries

The tested camera installation uses kernel 7.2.12-sdm660, r9 boot plus r11 sensor module, with signed platina-libcamera 0.7.1-r31 and isolated Mesa 26.1.6. The checked-in kernel recipe is the 7.2.12-r13 development candidate, with device 5-r31 and the public source firmware recipe 2-r5. That combined kernel and a new full 0.8.1 image have not passed a complete hardware installation test. Camera packages are built/installed separately; make images does not yet add them.

No prebuilt APKs, boot/rootfs images, proprietary firmware or calibration data are published. Provide your own administrator public key and matching firmware, retain a verified recovery path, and qualify each new kernel/image on your device. Initial installation erases Android user data. See installation and building before any flash.

git clone https://github.com/Sukecz/platina-linux.git
cd platina-linux
make doctor
make check

To stay powered off, disconnect USB/the charger, hold Power + Volume Up for at least 3 seconds, then release both. Attached power triggers a charger-mode boot; this accepted limitation is not changed by the camera release.

Only Mi 8 Lite / platina and the tested Tianma NT36672A panel are qualified here. Other Mi 8 models and BOE panel variants need their own integration/tests. Integration versions are separate from kernel and Alpine package versions.

Credits and license

Built on postmarketOS, Alpine Linux, SDM660 mainline, libcamera, Mesa and the community Mi 8 Lite port. Xiaomi's published kernel sources provide device/panel reference data. Original authors, SPDX declarations and upstream notices are retained.

Original integration contributions are GPL-2.0-only unless marked otherwise; libcamera-derived code and helpers retain their LGPL terms. Firmware remains proprietary and is not included. See LICENSE, NOTICE and licensing.

S
Description
No description provided
Readme GPL-2.0
536 MiB
Languages
Python 78.7%
C 7.8%
Shell 7%
C++ 3.9%
HTML 2.4%
Other 0.2%